Request Quote
My Account

sales@typhoondust.com

email

1-225-567-3867

local

1-877-398-7362

toll free

Request Quote
My Account

iVAC Auto Blast Gates & Dust Collection Remotes

iVac Pro System for Automated Dust Control

In this demonstration video, the iVac Pro System is turned on with a power tool. Immediately the iVac Pro Tool Plus senses this activity, sending a signal to open the blast gate. You'll notice the blast gate was opened. At the same time, a signal is also sent to the iVac Pro Switch to start the dust collector after 1.5 second delay. When the power tool is turned off, the iVac Pro Tool Plus sends a signal to close the blast gate as well as a signal through the iVac Pro Switch to turn off the dust collector. In a typical setting, the blast gate will close after 50 seconds and the dust collector turns off after an additional 5 seconds. NOTE: Typhoon can configure systems up to 25 horsepower.

Contact

POPULAR

Resources

Newsletter

Install all dust collectors and accessories in accordance with the NFPA 664, OSHA regulations, and other federal and local codes. NFPA 664, OSHA regulations, and other codes shall govern any installation of our dust collection products. UL, CSA, or other engineering labels are available at an additional cost and must be specified and quoted prior to placing an order. All specifications on this website are herein subject to correction or change without notice. Any critical specifications or requirements must be verified prior to placing an order.

2022 © PMC TOOL

Join the Club!

We will not share your information or wear out our welcome.